Prime-Line U 10827 Door Reinforcement Lock – Add Extra, High Security to your Home and Prevent Unauthorized Entry – 3 In. Stop, Aluminum Construction, Satin Nickel (Single Pack)

This is a good looking, very sturdy metal door-stopping lock that works well and is available at a good price. The video provided on the product listing was a helpful, step by step tutorial, and made it easy for me to set up, once I found my drill and the appropriate bits. One thing I will say is if you have a tight fitting door, you may need to chisel away some of the molding to get the lock into the narrow space between the door and the frame. I didn’t have to, thankfully, and the door closes easily with it on, but keep that in mind. The metal material is thick, and after locking it, I was unable to open the door, no matter how hard I tried, which is a nice sense of security to have. It also looks nicer than the ball-and-chain type locks you see in hotels, which I was considering getting until I decided on this one. I’m about to get another one for my garage door as well. Very satisfied!

Our children had reached the age where they can open child-lock doors, and after discovering my 2 year old daughter has an exploratory vibe and had gone downstairs into the basement unnoticed, I decided to try one of these door locks. Note that this is interior to the house, so it's not so much to prevent break-in, just control access. Note that it's important to always have an egress path from where they are installed in a locked position in case of emergency. I would prefer a different design that has egress options on both sides of a door if you're trying to train a child to stay in their bedroom. I went with this model because the finish matched the rubbed oil bronze finish of the door hinges and door knob. After installation, the door security lock fits nicely with the decor. The door security kit comes with short screws that go into the door jamb that provide less strength, and longer 3" screws that should anchor to the stud frame around doors. There is more potential for stripping the screws if you only use the short ones that go into the door frame instead to the jamb. This is because the short screws would only anchor to the door frame that is often a type of decorative molding that doesn't have the structural strength of 2x4" studs (it doesn't take much force to deform the material). I decided that even if installed indoors, I wanted the door lock to be secure so I decided to use the longer 3" screws. The installation was easy but not without incident. Note in the picture with the drill bit and screw side by side that they are about the same length. When you put the drill bit in the drill, you have to sacrifice some length because the shaft sits in the drill chuck. The common drill bit length that you get in a normal drill bit set will not pre-drill the entire length of the longer 3” screw. So I pre-drilled as much as the shaft would allow me to drill, and used the lowest setting on the impact driver to push the screw into the hole. I had less than 1/2" remaining and it would not progress any further on the impact driver’s lower settings. I didn't have a longer drill bit length so what did I decide to do? I cranked the impact driver to 3 and after about half the distance I snapped the screw head clean off. Kraggle! Now I had a headless screw that was majorly stuck and the remaining screw was only protruding about 1/4" from the door frame. To remedy this, I used IRWIN Visegrip Quick Adjusting GrooveLock 10-in Electrical V-jaw Pliers to pinch the small remaining exposed screw length and spent about 15 minutes de-threading the screw from the door jamb. I needed the longer pliers length to get the torque to unscrew the threads, but when the pliers are that big, I still ended up deforming the door frame molding a little bit. I went to Lowe's and looked for a DEWALT 1/8-in 6-in Black and Gold Coated Hss Twist Drill Bit. Lowe’s was out of stock, but they had a 12 inch length drill bit in stock so I just decided to go with that. I would have preferred the smaller drill bit length but the door opening width still gives enough room with the 12 inch long drill bit to pre-drill the holes straight on. To ensure I didn't over drill the screw length, I placed a wrap of painters tape at the length on the drill bit to mark the screw length so I'd have no risk of over committing the hole and drilling through drywall just a few inches beyond the door jamb. Once I pre-drilled the correct length, I was able to use the impact driver on the lowest setting to drive the screws all the way into the door frame and jamb. Note with philips head screws, try to use the "fattest" impact driver bit that will still fit in the screw head. It's the best way to help prevent deforming the screw head from the bit slipping. In the end I had to borrow one 3" screw from a second kit that I had bought, though I could have gotten away with using two 3" screws on top and bottom and one small screw in the middle. Hopefully you read this making the same mistake! To open the door, you just have to pull out away from the door frame and then rotate to open. To close, you can simply rotate it back and it will snap into place, or you can pull out a little bit and you won't get the small "snap". All in all, I'm very happy with the end result, as now we have control of access to the basement to keep our little ones safe (and help keep the wife sane). It's easy to use and the wife loves it, so it's a win-win. Highly recommend if you want something to fit the house decor even though some people may consider it a little bit overkill.

I live in a neighborhood where home invasions are frequent so i needed to think about what am i going to do to keep my family safe. I am a security conscious person. The first thing i think about is security in any situation i am in. This reinforced door lock is not only a simple device it's easy to install. I've seen a lot of people put this lock on the top part of their door and I can tell you putting it on top doesn't offer much security if an intruder tries to kick down your door. The middle of the door is the center of where force is met when someone kicks in your door. If you put this lock on top of your door the pressure from the blows to the door will put more pressure to the top area and snap the bottom portion of your door. The force of the blow is in the middle and that's where the lock should be to take the blows. How do i know? because I experimented on two doors using this lock. I placed one on top of my door were I see people putting it and i put one in the middle of the door. I found that the lock adsorbed the blows when the reinforced lock was put in the middle. We kicked the door down as hard as we could, we hit it with a sludge hammer, and also used a crow bar and it did not budge. When we put the lock on top we found that the door frame broke off and the door snapped because the pressure of the kicks and sludge hammer had snapped the door in half breaking the bottom part of the door. It all has to do with physics. This lock is well constructed and easy to open and close. I will say this. It's good to oil up the lock hinge from time to time to avoid friction which will occur over time. Also use concrete screws when drilling these onto the door frame. The screws that come with this are cheap and will break off if anyone dares to kick your door down. Overall this is an easy to install lock and well worth the money. I feel safe at night knowing nobody can break down my door even if they tried. This if placed right will withstand 500 and more lbs of pressure. SIDE NOTE: For extra added protection you should combine this with a metal door strike plate (as seen in photo). This makes it harder for people to break down your door and reinforces your door frame. Overall great solid buy and a must have to secure your home.

As a homeowner who prioritizes the safety and security of my family, the Defender Security U 10827 Door Reinforcement Lock has become an essential addition to my home, providing an extra layer of protection against unauthorized entry. The first thing that impresses me is the sturdy aluminum construction of this door reinforcement lock. It offers robust durability and strength, ensuring that my door is fortified against forced entry attempts. The 3-inch stop is a standout feature of the Defender Security U 10827 Lock. It effectively prevents the door from opening beyond a certain point, making it challenging for potential intruders to breach. One significant advantage of this door reinforcement lock is its easy installation. It fits most standard doors, and the installation process is straightforward, requiring only basic tools. The satin nickel finish adds an elegant touch to the lock, complementing my door's aesthetics while providing reliable security. In conclusion, the Defender Security U 10827 Door Reinforcement Lock is more than just a lock; it's a high-security solution for protecting my home and preventing unauthorized entry. With its aluminum construction, 3-inch stop, easy installation, and stylish satin nickel finish, this door reinforcement lock has become a critical component of my home security system. For homeowners seeking peace of mind and enhanced security, the Defender Security U 10827 Door Reinforcement Lock is a top-notch choice. Safeguard your home and loved ones with confidence, thanks to the Defender Security U 10827 Door Reinforcement Lock!

We recently installed the Prime-Line U 10827 Door Reinforcement Lock, and overall, it’s a great addition for extra home security. The lock itself feels sturdy and well-made, providing a real sense of reinforcement against forced entry. Installation was straightforward, and the design is clean and unobtrusive. That said, the included screws aren’t the best quality — they strip easily, so it’s worth using your own stronger screws for a more secure fit. Once installed properly, though, the lock works exactly as advertised and adds valuable peace of mind.

Easy to install, very sturdy, finish holding up so far

The defender door locks are easy to install and provide a secure indoor locking function. What I really like is the ease of installation. I pulled out the Dewalt impact screw driver and my first one was done in a couple minutes. I did not have to pre-drill but probably a good idea to do if you do not have a impact screw driver. I like this so much I bought another one for a different door. The second one I installed required me to cut out a door frame notch for it to mount flush and work properly. Without the notch it was hitting the door when it closed. This took about 10 minutes with a chisel to do. They both work smoothly and fast to engage and disengage. They work well not only securing the door but providing that extra layer of protection along with the deadbolt. It's also good to prevent those smart kiddos that figure out how to unlock and open the front door at age 3. Pros: Easy install (on most doors) Good value Secure and strong Attractive and a small space footprint Multiple finishes to pick from Helps child proof the house Cons: Have to get use to how to open and close these Some doors may require a little chiseling for mounting You can accidently lock someone out (as with all indoor only locks)

Reinforcing your entry door is one of the simplest, cheapest, and most effective upgrades you can make to home security. The reason is simple: door locks really only keep honest people out. A bad guy with a screwdriver, a bump key, or just a sturdy boot can get your door open in seconds. At this price and quality, I think devices like this should come standard on every single front door. My usage scenario is to engage these locks only at night. If I lived in a rougher neighboor I would probably engage them all the time. It's important to remember that in home security, you're only as safe as the weakest entry point. I feel that these locks would stand up against a 200 pound guy trying to kick or shoulder a door in - but would the rest of your door frame? What about where the hinges are mounted - both to the door and to the frame - are they similarly secured with long, sturdy screws? And of course, if your home is like most, you probably have a window near your door. For those reasons, I feel the best way to think of these locks is as an extra layer that will give you more time to respond to a threat - time to call the cops, gather your family, barricade yourself somewhere, leave from another exit, access any home defense weapons you might have, etc. IMPORTANT NOTE: these close only from the inside. They can only be engaged if you're home (though of course you can engage them on one door and leave through another). Installation was very easy, but in my case, since I have molding around the door frame on the interior side, I had to use a chisel to create some space. Make sure you position it so that the rubber stopper is directly against the inside of your door when the device is engaged. You don't want to leave wiggle room for your door to develop inward momentum if it is kicked or forced - you want it to be set in place. I mounted two of these, one at the top and bottom, directly opposite the door hinges on the other side. They are easy to operate once you get the hang of the "trick" - pulling the rotating piece to the side, against the internal spring tension, allows you to then rotate it open or closed. It only takes a second once you know how and both of my young children can do it. I am not sure I agree with other reviewers who use this device as a "child lock". For a two year old, maybe - but I would want my 6 year old to be able to open the door if needed (e.g. to still be able to escape the home if the taller people were incapacitated for some reason).