Amazon Basics Traditional Electronic Keyless Keypad Deadbolt Door Lock, keyless Entry Door Lock, Keyed Entry Option, 1-Pack, Satin Nickel

Second one of these that I ordered worked great. First one had a open box of baking soda instead of the lock in the package. The package appeared to be untampered with. I assume some jackass at Amazon trying to be funny. Customer service told me to throw away baking soda. Now they want "defective " lock back. Hasn't been a pleasant experience for me.

This locking system is great for me, for my case. I needed something for my Airbnb house, and I was looking for something where people could punch in codes, and where I could reset different, like, codes for different people. And it's really easy to get in and get out, and I like how it automatically locks behind you as well, too. So that was a plus. I really recommend this item, and I definitely would buy it again.

Easy to install with one caveat. If the lock isn’t at factory reset settings when installing it might not do rehanding properly. The programming code would only work with the door locked and would unlock when pushing the lock button and lock when pressing the unlock. I fixed this by installing batteries with the lock not connected to the keypad and pushing the reset button

I purchased two of these back on July 16, 2024; one of them is still working (fingers crossed), but the other one gets stuck half way when trying to open with code. I removed the cover to see if something was obstructing the locking mechanism, but the lock is fine...its the knob that locks/unlocks the deadbolt that is causing it to stick halfway. I thought for sure it had to be warrantied for more than six months, but on the listing for this product on the Amazon site for an "Amazon Basics" brand, when you click on warranty information, it says, "Please contact the seller directly for warranty information for this product. You may also be able to find warranty information on the manufacturer’s website." ???? Amazon, you are the seller...and according to the name of the product "Amazon Basics Traditional Electronic Keyless Keypad Deadbolt Door Lock," you are the manufacturer according to the product details, even though it is manufactured in Taiwan.So I would advise not purchasing these locks...not worth the headache, especially with no warranty. I am going to try and fix it myself, but will most likely have to purchase from another manufacturer, and not sure if I will try my luck purchasing it through Amazon, unless there is a clear warranty provided.

Great little combo lock. Have others that have worked without fail.

Great product easy installationWould highly recommendComes with 2 keys, need 4 aa batteries to operate n

If your instructions don’t work, it’s not you, it’s the wrong instructions and they’ll NEVER WORK. I worked on this simple lock for HOURS with no avail!!!! One of the reviews used instructions from Kwikset but lacked the part for deleting the factory programming code. Here’s the FULL INSTRUCTIONS:here’s how to run the door handing identification process on your AmazonBasics Electronic Deadbolt:On the keypad, enter the preset Programming Code (0000). Next, press the Unlock / Lock button.Press 0, then press the Unlock / Lock button. You’ll hear the motor of the lock run, then stop after a few seconds, indicating the door handing identification process is complete.So that’s all you need to do to teach the lock the orientation of your door (door handing identification).How to Change the Default/Existing Programming Code on Your AmazonBasics Electronic Deadbolt?So after performing the door handing identification, the next thing you want to do is change the default Programming Code. As you probably know, this lock comes with a 4-digit default Programming Code (0000), and you’ll need to change the default code to ensure security.To change the default/existing Programming Code on your AmazonBasics Electronic Deadbolt, follow the steps below:Enter the default Programming Code (0000) and press the Unlock / Lock button. If you’ve previously changed the Programming Code, enter your current Programming Code and press the Unlock / Lock button.Press key 4, and then press the Unlock / Lock button.Enter a new Programming Code (4 digits), then press the Unlock / Lock button.If the lock flashes green twice and beeps twice, it means the operation is successful. So the new Programming Code is now in effect, and you can use it to program other functions in the lock.Deleting the Default User CodeLike the default Programming Code, the lock also comes with a default User Code (1234). Note that Programming Code differs from User Code. Programming Code is used to put the lock in programming mode, while the User Code is used to unlock the lock via the keypad.So you’ll need to delete the default User Code to prevent unauthorized access to your home.Here is how to delete the default User Code on your AmazonBasics Electronic Lock:Enter your Programming Code and then press the Unlock / Lock button.Press 2, then press the Unlock / Lock button.Enter the default User Code to be deleted (1234) and press the Unlock / Lock button. This will delete the default User Code.Note: You can use this method to delete any existing User Code on your lock, including the ones you created. You’ll only need to enter the code you want to delete in the last step—as you can see above.More so, you can delete all existing User Codes in your lock at once. Here’s how to do that:Enter your current Programming Code and press the Unlock / Lock button.Press key 3, and then press the Unlock / Lock button to complete the process. The lock will flash green twice, followed by two beeps, showing that all existing User Codes have been deleted.How to Add New User Codes on Your AmazonBasics Electronic Keypad Deadbolt?After deleting the default User Code, the next thing you want to do is create new User Codes. Note that you need to create User Codes to be able to unlock the lock via the keypad.So here’s how to add a new User Code:Enter your Programming Code and press the Unlock / Lock button.Press key 1, and press the Unlock / Lock button.Enter a new User Code (4 to 10-digit number) and press the Unlock / Lock button. The lock will flash green twice, followed by two beeps, showing that the new User Code is now in effect.Repeat the steps to add more User Codes. Note that the lock allows you to store only 10 User Codes at a time. If you’ve added up to 10 codes, you’ll need to delete one to add a new code.How to Disable/Enable All User Codes on Your AmazonBasics Electronic Deadbolt?If you don’t want anyone you shared User Codes with to unlock the lock, you can simply disable all the User Codes. That is, the lock can’t be unlocked with a User Code during this time.To disable all User Codes on your lock, follow the steps below:Enter your Programming Code and then press the Unlock / Lock button.Press key 8, then press the Unlock / Lock button.To enable all User Codes, repeat the steps above.How to Create a One-time User Code on Your AmazonBasics Electronic Deadbolt?A one-time User Code is used just once. That is, the code expires once it is used to unlock the lock. You can create a one-time User Code for a serviceman or any guest you just want to give one-time access to your home.That said, here’s how to create a one-time User Code:Enter your current Programming Code and press the Unlock / Unlock button.Press key 9, then press the Unlock / Lock button.Enter a one-time User Code (4 to 10 digits), then press the Unlock / Lock button.Enabling/Disabling Auto-LockThis AmazonBasics Electronic Deadbolt comes with the auto-lock feature that automatically locks the lock after a few seconds (when the door closes). However, this feature is disabled by default, and you need to enable it to get it working.Here’s how to enable auto-lock on your AmazonBasics Electronic Deadbolt:Enter your current Programming Code and press the Unlock / Lock button.Press key 5, then press the Unlock / Lock button. This will enable auto-lock in your lock.So the lock will lock automatically after 30 seconds of closing the door.To disable auto-lock, repeat the steps above.And if 30 seconds delay time is not okay for you, you can set it to your preferred delay time. Here’s how to do that:Enter your Programming Code and press the Unlock / Lock button.Press key 6, and then press the Unlock / Lock button.Enter delay time (10-99 seconds) and press the Unlock / Lock button.How to Factory Reset Your AmazonBasics Electronic Deadbolt?If you have some little issues with your lock, such as lost/forgotten Programming Code, you can reset the lock and then use the default Programming Code to reprogram it.Note that this action will permanently delete all your custom settings, meaning you have to start all over again to program the lock.That said, here’s to factory reset your AmazonBasics Electronic Keypad Deadbolt:Remove the battery cover to find the Reset button (a round button labeled “R”). Next, press and hold the button (for about 6 seconds) until you hear three beeps.The three long beeps show that the reset is successful.Next, perform the door handing identification to ensure optimal operation (see how to perform door handing identification above).You’re welcome. ;)

Love this convenience!