SkinArms AR-15 Mag Skins, 2 Pack, 100% Waterproof Matte Finish Vinyl Decal, Precut Pieces Easy to Install and Fits AR-15 Magazines, Protects Mags with Style (SA Skull Vengeance)

USEFUL TIPS BEFORE INSTALLATION

✅All SkinArms products are manufactured with American Made 3M vinyl. It has pressure-sensitive adhesive for easy application and can be slid for precise positioning and repositioning. Adhesive may however lose its properties if vinyl is applied with strong pressure and peeled off.

✅Use a heat to stretch SkinArms wraps up to 130%. Do not use a torch. Overstretching may cause shrinkage, color fading and tearing.

✅Most trapped air can be pushed out from the edges through invisible air-release channels underneath the vinyl. If air bubbles cannot be pushed out, pop a little hole on the bubble to let out the air and press down the vinyl again.



SkinArms INSTALLATION GUIDE

🔫1. Clean your weapon thoroughly with degreaser or non-chlorinated brake cleaner, and let the weapon dry.

🔫2. Apply precut pieces to designated areas. If product is not precut, measure the size of parts you want to wrap on your weapon and cut out a little extra vinyl for that area.

🔫3. Remove liner and place vinyl on desired sections. Snap up and reposition if needed. Spread the vinyl to remove large s, but do not stretch yet.

🔫4. Use the heat in circular motions to allow the vinyl to stretch and conform to the weapon.

🔫5. Use a squeegee to apply intense pressure, especially in the corners and areas stretched. Trim out any excess wraps with a hobby . Only cut the vinyl when it’s cooled down.

🔫6. Remove any air bubbles through air-release channels or little popped holes.

🔫7. Re-heat vinyl and press down firmly with a towel or foam, and squeegee the edges to assure strong adherence.

🔫8. Your weapon is now set. Enjoy!

• 🇺🇸[PRECUT MATCH WITH AR15 MAGWELL] Designed to fit any AR-15 Magazines up to 30-round 5.56 x 45 NATO (.223 Remington). The kit includes precut pieces for the left and right side of TWO magazines that perfectly accents the entire AR-15 , turning the mag from a hollowed piece into the true centerpiece of the firearm. Works on airsoft and gel blaster mags too!.
• 🇺🇸[EASY TO INSTALL] The SkinArms precut templates fit the AR-15 magazines perfectly. A thermal and a squeegee can be used to make the skin consistent with the mag. A hobby is not needed unless you want to customize the precut pieces. The installation takes no more than 20 minutes..
• 🇺🇸[PERFECTLY REMOVEABLE] SkinArms Mag Skins are removable and has no effect on the finish. To remove the SkinArms products, just heat the material with a heat /blow dryer and peel off. If there is any residue left behind, use rubbing alcohol to remove..
• 🇺🇸[ADVANCED MATERIALS] SkinArms Mag Skins are made of top quality American manufactured 3M vinyl decal that is non-porous and waterproof and has a non-reflective matte finish..
• 🇺🇸[LIFETIME WARRANTY] SkinArms always takes customer satisfaction as our first priority. All of SkinArms products have a Limited Lifetime Warranty which covers regular usage by the first user. Feel free to send us an email if you have any questions or product suggestions. If you are not satisfied with the product, we guarantee free return!.