VFD Variable Frequency Drive,Single‑Phase 110VAC Input 3‑Phase 220VAC Output Variable Frequency Inverter,Motor Speed Controller,220V 1500W AT5‑1500X, default

Worked great on my drill press rebuild with a 1HP motor. Seems to be well made enough as long as it's not abused.

Very nice VFD, I used it for a 1.5hp 220v motor and it’s a perfect match. I didn’t have to change any parameters, plug and play. I see other reviews stating that it doesn’t work with a gfci outlet, but I had it hooked directly to a gfci and there were no issues. Highly recommended.

The description is wrong; 110vac single phase in, get 110vac 3phase out, not 220vac. It may run with 220vac in but check with the seller.

I used this VFD along with a 1 1/2 HP 3 phase motor to power an older wood lathe. Everything went as it should, and this gave the lathe much more flexibility with the slower, adjustable RPM. I was very pleased on how this worked and would recommend this unit to anyone with this type of application.

very easy to wire. converted a wood cutting bandsaw to cut metal

well, NO manual included. Fortunately I've wired a few VFD's before. The problem here is that the mechanical design of the electrical connection posts was very bad. You have to stick a screwdriver in thru a slot to get to the screws. The slot is narrow and the "clamp" does not open enough to make a connection to a #12 stranded wire very easy. Yes, could have used a #14, but that is not what was being used. The screws are very short, so when you try to open the gap enough, the screws come loose and of course then you can't get in there to get them back in. For a job that should have taken 2 minutes, it took me 30. So far it works fine, but definitely a poor design.

It was packaged well, and no damage to the box. The screen has a small puncture, like it happened in production sitting next to another, and probably works fine. I wanted to just replace the little module but that doesnt seem like an option. seems well built, and smaller than i thought it would be, which is nice. will update after wiring up and running my 2x72edit- new one came. its awesome. only thing to look out for is the stickers on the machine vs the actually board. they do not match 100%. when wiring, make sure you look at the labeled board to confirm youve hooked up correct.

I was extremely pleased with the functionality of the VFD. It changed single phase 110 v to 3 phase 220v for a 3 phase motor which now allows me to control the speed and reverse direction with a nob and buttons. I'd by it again!