Logmey 25 In Laundry Sink Drop In - 25x22 Inches Handmade Utility 12 Inch Deep Topmount Sinks 16 Gauge Stainless Steel Single Bowl Sink for Laundry Room 25x22x12 Inch

Very nice, high quality super easy install. It’s made a huge difference in the usability of sink area in our laundry room. It would be perfect if you have small dogs you groom. Great value for the money.

We recently gutted and renovated our laundry room and this sink was perfect for the new design. The included accessories make it a fantastic value. It mounted easily and looks great.

This is a review of the 33 Drop In Sink - Logmey 33 x 22 Kitchen Sink Stainless Steel 18 Gauge Topmount Single Bowl Kitchen Sink.First of all, the packaging is amazing. The box was lined on four sides with three-eighths-inch thick plywood with the sink surrounded by a couple inches of styrofoam. All the accessories were inside their own boxes or bubble wrap and I can't see how one of these can arrived damaged. (I suppose if it fell out of a moving vehicle.) Ours was perfect.See the photos for how it looks. We love it. The zero-radius corners aren't as easy to clean as anything with a larger radius, but it does look very impressive. Ours came with a rollable drying rack that spans the sink from front to back with silicone ends to keep it from sliding around. Haven't used it yet, but it could come in handy. What's not as useful is the bottom wire rack that occupies the entire bottom of the sink. I know these are very trendy, but the truth is, when you get ANY debris under there, the whole thing needs to come out of the sink to clean it. It's easier to just leave it out, but then the question is where to store the thing. It's so big that we don't have any cabinets that will easily accept the rack.Some installation tips:The clamps are difficult to put on the hangers under the sink and you NEED to install them before the sink goes in the countertop. Once they are installed, you might have to squeeze them a bit to get the teeth to fit between the sink and the countertop as you drop it into place. Even if you do this, some of the teeth may be pushed up toward the sink and won't be low enough to engage the underside of the countertop. You can simply pull the teeth down into position with some pliers (Channel-Locks are good for this). Have someone help guide the teeth into the countertop as you install the sink—if any of the teeth flip up as you are dropping the sink into position, you will NOT be able to get the sink fully into the hole and if any of the other teeth go in and then spring into place under the edge of the hole, you may have a hard time getting the sink back out to correct the problem. And since you'll probably be doing this with a fresh bead of caul or silicone around the opening, you definitely don't want to screw this up. (I've provided photos of all these tips in this review.)Update: After 15 months of use, we still love this sink. Being stainless steel, it does have a few scratches, but the overall appearance is still amazing. The flat bottom has been great when we bake as we can stack big bowls and utensils for hours before worrying about cleaning up. As far as cleaning the sink, we found a squeegee and keep it right next to the sink for pushing the remaining water towards the drain. It drains without doing this, but the process alleviates a lot of the water spots that can occur if you don’t dry the sink right away. We use the included drain rack all the time, especially nice since it simply fills out of the way when not in use, but the tray that is supposed to sit inside the bottom of the sink hasn’t been inside since the day we got the sink. It’s just too much of a hassle to remove if you need to clean the sink bottom. It’s nice and very well made, but impractical.

I was so excited when my sink arrived. It was packaged carefully and had no damage. It had been delayed for a couple of days but not due to anything with the seller but USPS. It was easy to install and the directions were clear. It is a wonderful addition to our kitchen and I am so glad I made this purchase. I can tell this seller takes great care with this product and I am so glad I finally have this beautiful sink!

Freaking awesome!!! This is the best sink I've ever had, and completly changed our kitchen from mediocre, to clean and modern. Wife is super happy!!!Water cup sprayer is extremly powerful, almost hard to push down but man does it blast away crusty lines and everything!Waterfall feature is so nice and smooth. Know is really well built. I wish the faucet head was magneticly attached, but the weight does perfect to keep it fully raised in position. The workstation is really fun to use and handy. Giving you more counter space with he cutting board. I got the 33x22 gunmetal waterfall workstation!

This sink is quite nice, no complaints at all. One good feature is that the top rim is twice as thick (3mm) as the sink itself. And the top rim is almost perfectly flat when I checked it with a straight edge, close enough. I replaced a 15 year old standard double bowl unit and this sink dropped in perfectly with no cutting of the counter top. The only tricky part is installing the sink clamps from underneath. Some reviewers state you cannot install them after the sink is in place, not true. Every installation will be unique. What you want to do is temporarily drop the sink in place then crawl under it with a flash light and look up at the clamp brackets that are attached to the sink. Move the sink front to back and left to right and to center the brackets to ensure you have clearance to hook the brackets with the clamps. Test fit the clamps. I had to re-bend my clamps to work with my counter top thickness. After ensuring this is good, go top side and apply painters tape to the counter top outlining the outer edge of the sink. This will protect the counter top when the caulk squeezes out and it makes it easy to remove the excess caulk after it has cured. Now remove the sink. Install the faucet. Apply clear RTV caulk to the counter top, inside your taped lines. Drop the sink in place aligning it within the tape edges. Crawl back underneath and center the sink so you can hook the brackets with the clamps. Install and tighten the clamps. It took me a good hour to get the clamps installed, a real pain in the butt. If my clamps didn't fit I would have just relied on the RTV to hold the sink in place, which would work fine. I drilled a one inch hole to the left of the faucet hole to install a soap dispenser.

The person who installed the sink was very impressed with the quality and easy installation. Looks very good. I liked the depth and now my belly won't get soaked Everytime I do pots and pans! The only thing I did see was the water spots, but not a big deal to me. Thank you for a quality sink without the high dollar cost

Sink arrived in good condition, but the enclosed cutting board was warped and doesn't fit the sink correctly. The supplier was unable to send a new cutting board, but did refund me a portion of the cost. This resolved the issue for me.