D-Line Medium Cable Raceway

This is a great way to hide your cords. The tape has held very well, even after we had to open the case to remove a cord. The case sealed right back up looks nice, blends nicely into our background you wouldn’t know it was there. Very easy to put up, holds more cords then I thought it would. It fits nicely it is easy to change the size to make shorter if you need it be the material is easy to cut and is flexible enough not to break .

If I could rate this 10 stars, I probably would... of course, time will be the true test! I had some really ugly black cable cords just sitting along the floor. Ugly to say the least. So, I thought I would try these. I just installed this along my base board (looks like quarter round) and it PERFECTLY holds and hides the cords. I have two cable lines and a very small, flat land line cord in it... plenty of room for another cable if necessary. There are no instructions.. but it's pretty easy. There is a clear film on the outside/front - the back is a the self stick. I was placing it on a painted, non textured wall - so it's very flat and the perfect material for this use. A couple of things I learned as I was placing it... it worked best for me to cord up the holder before sticking to the wall - IMPORTANT - the sticky back is SOLID - NO repositioning at all. You want to make sure you have shoved up against the last one you placed as tightly as possible - you will still see the seam between each length - but less so if you carefully, firmly place each piece. Before removing the sticky back I "placed" it in position to see if I liked it and it would work. Good thing, because once you remove the sticky back, it is NOT coming off without the sheet rock in torn pieces... just fyi. I chose to position the opening part of the D tube facing up to make it easier to put another cord in or take one out... personal choice. The ad says it is paintable and that is what I will try next. Having said that, I never hesitate to update my reviews should new info seem useful - and I am eager to see if this will stand the test of time and use.. meaning.. cords pulled, etc. I see no reason why you couldn't use this going up a wall (thinking of TV that has been hung on wall, etc - personal taste - but remember, the sticky tape is solid and won't be removed without tearing/damaging paint. As for textured surfaces - like wall texture, I am thinking that as positive as this sticky tape is, as long as it's not too textured, it should work - but to be honest, I have not tried it on a textured surface. As with most things that use a form of sticky tape, the smoother the surface, the better it will stick.) I hope this info was helpful to you!

This product is great. It is very rigid with strong adhesive. Before buying this product I ordered a less expensive option and immediately regretted it. Where this product stands out is the strong adhesive with adhered well to both a wall and ceiling. It’s been more than a month since I used this product to run speaker wire to rear speakers mounted on the ceiling. This product continues to work great. In addition to the excellent adhesive, I also like how easy it is to run the wire or cable instead the channel. It opens easily so you can lay the cable inside and then clips down securely once you’re done. It will be easy to add additional speaker wire or a cable ata letter time if the need ever arises. I’m very happy I found this product.

It works as described, goes on easy and is easy to add and remove cables from the channel. It looks great and wayyy better than 2 to 3 hanging cables. I only gave it a 4 instead of a 5 because I have a strong feeling the adhesive used is going to rip the paint off my wall, that being said it definitely won't fall off anytime soon which works for me.

It’s perfect for your needs good quality

Well made. Cover snaps into place easily and firm. A little expensive but worth the money. Recommendations: I have worked with this product in the past and can confirm the adhesive is very strong. It will pull the paint of the wall and or even the paper covering on the wall board if you try to remove it. So if you plan on leaving it there permanently no problem. Otherwise I always remove three small sections of the paper that covers the adhesive, I replace that small section with a piece of paper. then I put nano tape on the paper and then put it on the wall. If you ever decide to remove it, you can then remove the raceway without damaging your wall. A little more work but a lot better than wall repair and painting. I bought the medium size and ran coax and lamp cord thru it. Plenty of room. Could have done just as well with the smaller size.

They work fine, don't stick to the wall great, but that can be fixed easily. Loved that I could paint to match the walls, and that I was able to cut it to use for 2 different rooms.

This cable cover is a very simple but effective product. It definitely DOES open, and snaps shut as well. I used a small handsaw to cut the cable cover down to the appropriate length, sanded it, and then painted it to match my walls. I popped it open, and wove my cords through (it fit 3 cables quite snugly), snapped close and triple checked the placement before taking off the adhesive liner. For bonus points, I used a level before sticking it to the wall. Final product looks great and very professional. Will worry about removal in a few years when I have to leave....

Nice looking cover, fits 3 cables fine (power cord & 2 HDMI cables) - opens from the side.

The adhesion band is not quite the best and price is high for just a piece of plastic.

Although I returned it back because I changed my mind to install the light and no need for wires to be installed to the wall, the tube was easy to install and durable materials

Generally, good function and quality. I didn't used the entire adhesive trip as the product is very sturdy and just sits flat on the shelf. I peeled 1" at each end and middle to expose the adhesive tape. works great! (I read in reviews that using the whole tape may cause issues)

Nice One