Case for Raspberry Pi 4, ABS Pi 4 Case with Cooling Fan, Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B

The product is exactly as advertized, but the description leaves out a few features that I think should be noted.First, the kit comes with a total of 10 screws. The build uses 8. Now, extra screws aren't that uncommon, but adding a fifth to sets of four is not something you expect nowadays. It's a really nice touch that they would do that, as simple of an extra as it is.Secondly, the little screwdriver they include for assembly is slightly magnitized. If you drop a screw somewhere, or get it stuck in one of the holes, you can just pull it out with the included screwdriver. Helps a lot for lining them up vertically without worrying about the screw dropping, too.Thirdly, the case is very solid. It's ABS Plastic, but the finish looks as professional as molded plastic can, with no visible deformities and clear resessed lettering. It doesn't flex at all on either axis. Its small size does help it in this regard, as that reduces the resultant moment of torque applied, but still. It's amazing how many people put out an awful junky case, and this case is not one of them.Fourthly, the fan works very well. The bearing is smooth, and it is decent at providing real pressure difference and airflow for its size. It's not magic, it does make a bit of a humming noise and certianly is not 'whisper quiet', but it's not loud or overbearing at all.Fifthly, if you happen to install the fan on backwards, the connector wires are long enough to allow you to easily install it on the fan headers anyway. It's not a tight fit, either, easily doable. Such a small thing to include, but a major fustration saver.And, finally, on my unit, they put a little black sticker over the fan information sticker, because the sticker would normally be pressing up against the grate and be visible against the black case.This is a product where it is very clear that the designers really put user experience as one of their main concerns. I am a mechanical engineer by trade, and I can tell that this is a product that was really, actually designed, not just built to spec. As it is the only Raspberry Pi case I've ever purchased, I can't say for sure that it is the best, highest quality, best looking one at a good price. But I can say it's good looking, high quality, very reasonable for its price and built in such a way that it is clear the designers care about how it will be for a user to assemble the unit and what it will look like when done. They got both beautifully right, and the affordances and thought put into it just made me smile while I assembled it.

This is a great little case and exactly what I needed for my media center in my RV. The case is easy to install, feels solid, and has put up with some pretty big bounces on the road. I love that you can set up fan speeds between fast (audible hum) and slow (almost silent) so I can add cooling if needed. Weight was also a concern, since my trailer is a tiny 17' with only 1,000 lbs cargo capacity. Every ounce counts and this case is just the right blend of weight, strength, looks, and security. Since I don't need the I/O pins, it covers the functionality I need for the media center - USB ports, Ethernet, and power. This case was exactly what I needed!

I'm quite pleased with this case and would recommend it to anyone that needs an economical active cooled case. The included cooling fan can operate using the 3.3V and 5V GPIO pins for a low and high operating speed respectively. After some minor screw tightness adjustments, the fan runs on high in a way that it is much quieter than the fan add-on on the official red and black Raspberry Pi 4 case. Running at near idle for multiple hours, the CPU and GPU temperatures remained at a nominal 26.284C (79.3F) located in a room that was 20.55 C (69.0 F).The case is solidly constructed and includes screw slots on the under side to allow for wall mounting which was an excellent fit for my use case. For the very reasonable price, this will be my go to case for Pi 4's from now on.

This is a decent case, especially considering the good range of heatsinks you get, but the plastic itself doesn't dissipate any heat, unlike other all-metal cases, which I prefer since they tend to work a little better.It's not hard to assemble though, it functions well, and it's a pretty good kit for the price.

Fit and finish of the case it excellent. The Pi 4B board fits inside like a glove. The fan is barely audible and the Pi runs cool. Includes stick-on heatsinks so you don't have to buy these separately. Great value!