Happybuy GTA-F Model Racing Simulator Frame, Adjustable Cockpit Gaming Chair, Driving Simulator Seat, Steering Wheel Stand with Real Racing Seat and Gear Shifter Mount, Wheel and Pedals Not Included

Bang for the buck, a very nice racing cockpit. Well enough built for big guys or gals.There are some considerations... Initially I bought this for sim racing in VR, which is all fine and dandy, until I realized that I not only was learning the sim games but the VR headset too, and that was too much for me, so I decided I wanted to rock a single monitor until I was ready to transition back to vr. ( I don't know it was just too difficult to learn the games and controls and VR)So I decided I wanted to add a monitor, and there in lies a problem I couldn't come up with a good cheap option to run this with an existing 27 inch monitor I already own. Sure if your going to place this and then run a 50 inch big screen on a wall that would probably be fine. But realistically there's no way to mount a monitor to this, and the couple options I found were like $200 for a monitor stand, I ended up finding a table to mount the monitor to and a monitor arm to hold and adjust monitor, so that was another $100, to get a decent monitor mount setup.My advice is to understand your monitor situation before jumping in otherwise this setup might not be the best choice for you, although at the price I bought it at, I could add the stand and still be at a reasonable amount spent.Also at 350 pounds (sigh...) currently the setup seem fine with my weight so far. Not many cockpits rated for big guys.

Arrives in two boxes. Packaging was adequate but the metal pieces will have some marring from bouncing around. Nothing horrible because all of the metal pieces were fully wrapped in bubble wrap. The seat was in a separate box and arrived in good condition. The seat is more comfortable than I thought it would be. Instructions are really just a parts diagram. They include tools, which could be used to assemble the unit, but I recommend you have some extra tools like a crescent wrench, phillips screwdriver, and metric L wrenches if you want to keep your sanity. The most difficult part was getting the seat mounted correctly. Once assembled and everything tight, there is little movement. Not heavy enough for a direct drive wheel or heavy pedal set in my opinion. Mounting screw holes for for Logitech G29 wheel, shifter, and pedals were in the right spots. You need to go to the hardware store to purchase the mounting crews for the Logitech set. I was a little worried about the foot pedal mount being spongy, but once all the screws are tight, it does not move. I am 6 foot even and 255 pounds and the unit is sturdy enough for me for long sessions of sim racing.

It’s great. I didn’t get the monitor stand part because I figured the thing would wobble around but now I wish I had gotten it. Sturdy as can be. Not recommend on hard wood floors! It will slide around and scratch. No directions other then a hard to see layout of parts but I’m pretty mechanically inclined and everything fell right into place.I recommend it and would buy another.

The media could not be loaded.  I love it. The chair is so comfortable easy to handle it. To assemble it it's a little complicated to many screws but and the end went I saw it all assemble together. It's amazing 😁

It looks like the same rig as the GTR but 100 bucks less. If you dont mind not having the GTR decal on the pedestal and stitching on the head rest.Great rig, very sturdy, easy to assemble in less than 1 hour and pretty comfortable. Would recommend.

Shipped quick, very nice quality, all the hardware and tools were there. The instructions are virtually useless but if you have common sense and can use basic hand tools it is easy to assemble. The seat is a little firm. After a couple Hours of racing you will feel it, I suggest a seat cushion. Overall It’s a very nice rig that is totally worth the money.

The product came in two boxes, the seat and the metal parts. The seat is very nice, the metal structure is nicely welded, clean fit, and well finished. The instructions were just one vague picture, but it was adequate for anyone who can read a diagram. I did make some mistakes that I had to take apart and re-assemble correctly. The foot pedal plate is a solid plate but the way it connects to the rest of the rig is kind of kludgy.I have put some rubber spacers in the foot panel and steering plate to keep them from moving around. But once done, it's a really nice setup.I then mounted the full rig on top of a 2' x 4' plywood and added a frame using 2" x 3", added industrial wheels to make it easy to move.I'm using a single monitor stand with a curved 32" monitor, and a made a backboard to mount the PS4, the sound equipment and power stuff attached to the monitor stand, the systems can be separated and moved around separately with only a few connections.I'm using two bass shakers and a 2 x 100w mini power amp.

Overall, this is a good rig for a racing wheel setup. The seat is comfortable and of much better quality than I expected for the price. The base seems sturdy and the foot pedals stay in place very well. All of the screws required to bolt the Logitech G29 to the rig were included. However, the main bar that supports the wheel seems to easily tilt. This isn’t really an issue, but I wish there was a way to lock it at the preferred angle. The major downside is the assembly process. The “instructions” included are a one page diagram that is of low resolution and very hard to decipher. If you have little to no experience putting together furniture this is going to be a very frustrating process. I threw the instructions to the side and just assembled using logic and process of elimination. I do have two extra bolts left, but everything is tight and solid.

I would like to start off say that it comes shipped in two different packages and you're not informed on this it doesn't have exactly diet it has a diagram but it doesn't tell you what screws go where you have to figure it out so that's a project in itself I was missing parts and then they tell you I tell them what I was missing and then they said send them pictures and then they'll get back to me well if you're a resourceful kind of person like me you can finish putting it together for yourself with your own screws if you can find a proper size bolts and nuts other than that you'll be waiting another week or two for the parts, other than that it is sturdy seems to be pretty comfortable I haven't spent much time in it yet because I'm waiting for Amazon to send me the rest of the things my steering wheel at all when you order all three things at once never expect to get them all at once sorry that part is Amazon fault either way do you have time to put it together and sit there and like working on puzzles it's not worth it when you're done

The media could not be loaded.  La barre au Millieu est sensé être a l'horizontale pour se connecter au pédale . Carrément souder a l'envers! De plus, le vendeur fournit seulement une image avec aucune étape écrit. Sa ma prit tout une journée a finalement le monter au complet après avoir coupé et résoudre le morceau. J'ai même couper ailleur car , même avec les ajustements disponible mes pied ne touchait pas au pédale je mesure 5"6pouces. Dernier point , la barre central ou s'accroche le volant tilt de haut en bas sans trop de force encore la 2 petit soudure et sait solide maintenant. Le siège est super confortable rien a dire la dessus une fois la barre central de volant souder tout est solide rien veut trembler j'utilise un g29 comme volant .

There are limited instuctions with this... And will take a while to assemble . good comfort and adjustability.The seat is a little funky to assemble(shipped sepeartly)was missing some nuts and bolts for attaching seat to stand. One of the eyelets that hold the pedel plate to the frame was broken. was easily reattached with a tig welder. I believe this to be the weak spot in the unit itself.. Logitech wheel and pedal set bolted down perfectly.. My only real complait is the wheel does not seat firmly on the bar supplied. I shimmed under the wheel to give it a firmer grip on that bar.. Overall a sturdy unit once assembled...

So far I'm very impressed with this unit. I was a bit skeptical at first as like others the seat came at a different time than the frame.Same as others I had 1 missing bolt and 1 of the plastic knobs for tightening the gear shifter plate was broken. But over all it feels very solid for the price and the seat is great. It slides on rails and reclines etc like a real seat. It has nice red stitching to make it stand out. So happy I didn't spend the extra 100$ on the GTR. Since the base plates come just black I decided to put some stickers on it for fun.Now if Amazon would ever send the wheel and pedals we could get racing! Speaking of shipping when I ordered this they literally shipped it out the same day. Very impressive.

The media could not be loaded.  It went together relatively easy, even without instructions, but seriously flawed design on the bar for the wheel mount. Only one screw to hold the bar, so there is no support to stop the whee base from tilting. It’s actually unusable in this state. I might return it, but willing to see about fixing myself to save the hassle.