HITBOX Multifuctional MIG Welding Machine -200A with Color LCD Display IGBT Inverter MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire MIG Welder (MT2000II)

Amazing little welder used it for alsorts of work, easy and portable upgraded from the mt2000.Put it to work and it's now payed for it's self would highly recommend this for some one running a buisness or some one welding as a hobby

Well made and easy to use great item

Great little machine , but only 4 stars because of the following:Supplied manual, is old, and doesn’t even have the same polarity shown in manual pictures as the machine delivered. As in positive and negative outputs are flipped- so question is the manual right? Or is the machine right, but manual wasn’t updated?Also manual doesn’t have anything to describe what the co2 and co2mix modes supposed to be?And last negative, earth clamp, way too short, i was welding under a car, and if it wasn’t for me using earth clamp from my tig machine, this welder would have to come right next to me in order for earth clamp to be usable.Positives :All cables are nice and thick.The wire feed mechanism, straight forward, seens to do the job, but again lack of explanation in manual, so what the pressure supposed to be , beats me, but positive because it seemed to be very tolerant from no pressure applied on feeder, to half pressure, machine just fed wire no problem.neutral: i come from hobby tig welding, i like the ability to set my settings. This has the automatic wire feed option based on voltage and current you set. For me that gives mixed results because for one you got no more control over pre and post flow gas time, critical for gas work especially outside, and the lack of burn back control is also critical to manually set up. To get good penetration i found myself to have to use 16v on 1.2mm and 90”amps” . But at that amp setting, wire starts shooting off at light speed so to say, and you need to wait a few seconds for machine to slow down (auto-adjust). If i turned amps down to 80 amps to have a good wire feed out of the gate, then i found that i lack penetration - to note i was using 5%co2 and 95 argon mix because of availability in local stores, but this isn’t an issue with manual mig welders because you can set them up to suit. Perhaps program would work well with 20% co2 if that’s what they intend it for? So honestly not quite a fan of this auto stuff, however from an ease of use i get why it’s appealing to most users - within 15 min of receiving the item i was already welding.Decent machine, and lastly i need to now contact seller to get a decent manual, especially due to lack of manual control I really need to understand what they mean with their automatic weld modes in order to be able to make most of it.

i bought this welder about three weeks ago and have'nt used it much until Saterday i'v used both the mig and stick i'm amazed at how brilliant it welds iv'e used to weld on pipe lines but i'm so out of practice i'm as good as a novice but this welder is the best i'v ever used highly recomended

Good power welder even plugged into standard 240v socketTorch not very strong and heat damages it but lots of spare availability so easy fixedWelds well straight from box

I bought this welder to weld a van up and I am really impressed with useability of the machine, it's synergic feature sets everything for you and you can literally turn one knob whilst under the van with no struggle. Didn't cost a bomb either. Would recommend

Bought this in September of 2023, used it literally 8 times for around a total of 3.5 hours welding, and now the motor driving the wire has somehow broken from the feed wheel and won't spin it. Up until that point I was very impressed, but I suppose cheap parts don't last.

Bought this on the advice of a Youtube friend. Vwcoco,who'd reviewed it on his channel.It's not for blasting mega amps into think plate steel but,works perfectly fine at what it's made to do! Brilliant for car body work and thin steel,even though I've used on 2mm steel with no problems what so ever. Torch has a nice and positive feel to it. The £60 gift card off the selling price sealed the deal for me. If you're looking for a welder that is light and boy is it light compared to my older transformer stuff,that doesn't blow holes through light steel all the time. I'd recommend this