Smart Pump Controller with 2 Modes Digital Display, BSPP G1 Threaded Interface, Adjustable Pressure, High Power, Easy Install, for Home, Garden, Industrial Use

This device works perfectly. I was able to set the turn on and shut off pressures as described in the product information.

Work great for a shallow well application, basic sprinkler operation.

I had the new unit on the shelf for a year and finally had time to install it. The input threads were damaged so i can use it and would like a replacement sent.

Compre este presostato para instalarlo en una red de acueducto que hice en la finca para llevarle agua a unos bebederos y funciona muy bien, fácil de instalar y programar. Me estaba presentando una falla de F--, pensaba que era la bomba o la succión de la bomba, y después de revisar varias veces la tubería de entrada me di cuenta que internamente el presostato estaba sucio, el lagua que bombeo proviene de una laguna de almacenamiento de agua lluvia y tiene material vegetal en el fondo. El manual que trae es muy básico, falta mas información

Revised my review and updated to a 4. Reason it ran and stopped was not this controller but a faulty thermal switch within the motor itself. Changed out the pump and it now works as expected. Installed it and set the starting pressure to start the pump if the pressure in the line dropped to 3 bar and had expected it to then stay on until I turned the hose off ie at the pump head max pressure. Does not appear to be the case. Just runs ok for 1-2 minutes and then switches pump off. No alarms nothing and hose is still open so why should it go off. The pressure can drop to 1.5 bar and still pump has not come back on. Thought in Mode 1 there was NO off and it would run to max head of pump. Big problem is it does not tell you why it stopped the pump, was it over pressure, was it lack of flow, you just don't know what it is doing or why. Revision:-Was too quick to blame the controller which was indicating the pump was on albeit the pump had stopped. Checked the outlet from the controller and there was power, then realized it had to be in the motor and checked to find it had thermal cut off protection which clearly was faulty.

Buen equipo y fácil de utilizar

I recently installed a submersible pump and wanted to upgrade the control system. We saw this and read about decided to try it. It's working good so far. Our pressure stays accurate according to what we set it to. Not had any issues so far seems to be a well made product. Great value for the price.

Will not run on 120volts trips the breaker and will not work. Converted my pump circuit to 240 volts (was planning on doing at a later date) and now is working as it should. Only time will tell if it is going to last !?